Slayer Steam EP 2 grupos Máquina de café expresso
The Slayer Steam EP is the volumetric Steam. Same architecture as the LP, the same saturated groups with a dedicated brew boiler and a separate steam boiler, but the manual extraction controls give way to repeatability. In the 2 group version it is the machine for a cafe that has already settled its recipes and wants them to come out identical every shift.
Volumetric does not mean no room to work: a programmable pre wet of 0 to 4 seconds still soaks the puck before full pressure arrives, and that is the part you taste. The valves are electronic solenoids, as on the LP.
What we love
It is the most accessible Slayer with two genuine saturated groups and a boiler per group. At this level that configuration usually costs a good deal more.
Consistency across baristas. If the problem on your bar is the variance between whoever opens and whoever closes, the EP takes it off the table.
Things to consider
There is one difference against the Slayer Steam LP and it matters: the LP adds manual extraction controls and pre infusion adjustable from 1 to 10 seconds between 1 and 3 bar. If someone on your bar wants to work the extraction, buy the LP. If you are after repeatability, the EP pulls the same coffee for less.
Careful with
This is professional counter equipment. It weighs around 100kg, it plumbs in, and it needs a dedicated 220-240V single phase supply. And the manual controls cannot be added later: if you think you will want them, the LP is the choice from the start.
Características
- Tipo de caldeira
- Caldeira dupla
- Capacidade total da caldeira
- 10,8 (2x1,7 + 7,4) litros
- Potência elétrica
- 4700-5600 W
- Tipo de grupo de extração
- Sistema de grupo saturado
- Tipo de bomba
- Rotativa
- Alimentação de água
- Ligação à rede de água
- Capacidade do depósito
- Apenas ligação à rede de água
Extras
- Lança de vapor
- Sim
- Saída de água quente
- Sim
- Perfil de pressão variável
- No
- Controlo PID
- Sim
- Temporizador de extração
- Sim
Dimensões
- Largura
- 890 mm
- Profundidade
- 710 mm
- Altura
- 425 Mm
- Peso líquido
- 100 Kg
- Diâmetro do grupo de extração
- 58 Mm
Materiais
- Material da caldeira
- Aço inoxidável
- Material do grupo de extração
- Aço inoxidável
- Material do corpo
- Aço inoxidável/alumínio
- Material da estrutura
- Aço inoxidável/alumínio
- Referência
- 58STMEP2GR22
- MPN
- ST2EX9AL1001A
Comentários (0)
Não é possível enviar a apreciação da sua avaliação.
Denunciar comentário
Denúncia enviada
O seu relatório não pode ser enviado