★★★★★ Great workflow and options
Nikos K. · November 12, 2026 · Verified purchase
The new app from profitec makes it extremely easy to adjust settings
The Profitec Move 2.0 is a compact dual boiler that reaches brewing temperature in about 7 minutes and, for the first time on a Profitec espresso machine, connects to an app. It is still the Move we know: optimized ring brew group, 0.27L coffee boiler, 0.75L stainless steel steam boiler, espresso and milk steaming at the same time. The change happens under the panels: a new software generation, Bluetooth and Brew-by-Weight technology.
Brew-by-Weight: the shot stops by weight, not just by time. The Move has always brewed by time: set the duration and the machine starts and stops the shot on its own, so your settings repeat every morning. The Move 2.0 adds a second way to control the shot. Paired with a compatible Bluetooth scale, it stops the espresso as soon as your target weight is in the cup. You notice the difference when you change grind size or dose slightly: by time, the amount in the cup shifts; by weight, the machine responds to what actually comes out.
The Make Coffee Yours app. Every setting available on the machine display can also be adjusted from the app, and the whole extraction can be followed and analyzed in real time. With a scale connected you get an extra level of control: try different recipes, see the effect of every change in grind size or dose, and fine tune your shots to your taste. On the machine itself the controls stay deliberately familiar: if you already know the Move, you will feel at home straight away.
Compatible scales. Profitec lists as compatible Acaia (all models), Decent Scale, DiFluid Microbalance, Eureka Precisa, Felicita, Goat Story Gina, Hiroia Jimmy, Skale II, Varia AKU (all Bluetooth enabled models with updated firmware), Solo Barista, Ikape and Brewista X.
Everything on the OLED display. The discreet OLED display shows menu settings, machine status and shot time. Dosing buttons are programmable, pre infusion is adjustable, and the coffee boiler and steam boiler temperatures are set independently with PID control. Shot counter, programmable ECO mode, Barista Light, dual gauge and a low noise vibration pump complete the picture. If you only need espresso, switch the steam boiler off and the Move works as a single boiler.
More compact, easier to look after. The Move 2.0 is lower than its predecessor, 355mm tall, with even more balanced proportions. A Make Coffee Yours water filter comes included, together with a water hardness test strip: set your value and the machine reminds you when to replace the cartridge, when to clean and when to descale. The automatic group cleaning program does the rest. The 2.8L tank has a built in water filter adapter, and a sensor shuts the machine off when the water level is too low.
Modular portafilter. In the box you will find the bottomless portafilter with single and double silicone spouts to fit when you need them, three baskets (7, 14 and 21g), a blind basket for cleaning, a tamper and a cleaning brush.
What we love. Profitec has not reinvented the Move. Brew-by-Weight and the app sit on top of time based brewing instead of replacing it, and if you prefer to work only from the machine, you still can. And the Move 2.0 comes in two colors, black and yellow: the same machine, one understated and one that gets noticed in the kitchen.
5.0 out of 5 · 1 review (since 2026)
★★★★★ Great workflow and options
Nikos K. · November 12, 2026 · Verified purchase
We publish every approved review, positive or negative, without editing it. «Verified purchase» means the author bought the product from us.
Features
Extra
Dimensions
The questions we are asked most often about this machine.
The Move 2.0 is still a compact dual boiler with a ring group, an OLED display, programmable timed brew buttons, pre-infusion and scheduled on and off times, like the Move. Here is what changes:
On the machine itself the controls are the same as on the Move: if you know it, you will feel at home.
The Move 2.0 connects over Bluetooth:
For Brew-by-Weight you set the weight you want in the cup: the machine and the app remember it for the next shot, and the app records every extraction with its pressure profile, so you can compare it with earlier ones. The list of compatible scales is in the product description.
No, the Move 2.0 works without the app too, with timed brewing like the Move. The app adds functions and lets you change the machine settings from your phone; you only need a scale for Brew-by-Weight. If you prefer, the machine and the scale also connect to the Beanconqueror app.
You cannot switch it on remotely from the app, but you can set the on and off times there, along with the cleaning and filter reminders.
It depends on how much you use it, but as a rule:
Do not overdo the detergent: even in small amounts, over time it strips the grease from the gaskets and O-rings and dries them out.
The detergent clean is due roughly every 90-140 coffees.
With this routine and good quality water, the machine does not need descaling.
No. If you use the right water and keep up the routine (a flush after every coffee, a daily backflush with water and one with detergent every 1-2 weeks), descaling is not needed.
The 220 V version is rated 230 V: it suits 220-240 V mains, the voltage in most of the world, Europe included. If your mains are 60 Hz or low voltage, write to us before ordering and we will confirm the details.
Before plugging it in, always check that the nameplate data match your mains.